Cleared surplus
5000 kVA Pad-Mount Transformer for Sale, In Stock
1 cleared 5000 kVA 3-phase pad-mount transformer is in stock in 1 configuration with a 480Y/277 secondary, and it ships from stock. To get a quote, public and private buyers choose Request an offer and Gripp matches the spec, with no prices posted and shipping FOB origin.
Available configurations
1 configuration, 1 unit. Prices are not listed.
| Phase | Primary voltage | Secondary voltage | Condition | Taps | Bushings | Units available | Availability | Lead time |
|---|---|---|---|---|---|---|---|---|
| 3-phase | 12470Y/7200 | 480Y/277 | New | 2x2-1/2% ANBN | Dead/Loop (Pad) | 1 | In stock | Ships from stock |
Where a 5000 kVA pad-mount transformer fits
Three-phase pad-mounts at 5000 kVA are typically used for a single large low-voltage service, such as a large industrial building or a data hall fed from one switchboard. A 480Y/277 secondary suits motors, HVAC equipment, and 277 V lighting, and is the usual choice for larger commercial and industrial services.
Full-load secondary current is the first sizing check: at 480Y/277 a 5000 kVA 3-phase unit draws about 6,014 A at full load. The secondary conductors, main breaker, and switchboard or panel have to be rated for that current.
The 12470Y/7200 primary expects a grounded-wye feeder with a neutral, so confirm the utility or site system before ordering.
If the calculated load sits close to 5000 kVA, compare the 2500 kVA page under Nearby sizes before choosing a rating.
Nearby sizes
What to confirm before buying a 5000 kVA pad-mount transformer
- Primary voltage and connection against the utility or site feeder. Rows here list 12470Y/7200.
- Secondary voltage against the service you are building. Rows here list 480Y/277.
- Taps (2x2-1/2% ANBN) and bushing layout (Dead/Loop (Pad)). A loop-feed unit has two sets of primary bushings and a radial-feed unit has one.
- Percent impedance from the nameplate, which sets the available fault current at the secondary and has to suit downstream equipment ratings.
- Insulating fluid type, because site and fire rules can limit mineral oil close to buildings.
- The factory test report for a new unit.
- Pad dimensions, shipping weight, and offloading. With FOB origin shipping, the buyer takes responsibility for the unit once it leaves the origin.
Why buy surplus vs. new
A new pad-mount transformer is built to the voltage and accessory spec on the order, so the lead time is whatever the factory quotes. Cleared surplus in the table already exists, and the lead time to use is the one printed on the row.
On this page, availability is In stock and lead time is Ships from stock. Gripp does not add a ship date the lot does not state. Shipping is FOB origin.
Public and private buyers can request an offer for a row. That signup is how Gripp matches the spec. Prices are not listed.
Related
- Pad-mount transformersAll cleared ratings in this category.
- Gensets and switchgearBackup power hub. Listings appear only after a lot is cleared.
- 75 kVA pad-mount transformers8 configurations, 24 units. In stock. Lead time: Ships from stock.
- 100 kVA pad-mount transformers5 configurations, 28 units. In stock. Lead time: Ships from stock.
- 112.5 kVA pad-mount transformers6 configurations, 16 units. In stock. Lead time: Ships from stock.
- 150 kVA pad-mount transformers8 configurations, 20 units. In stock. Lead time: Ships from stock.
- 225 kVA pad-mount transformers7 configurations, 20 units. In stock. Lead time: Ships from stock.
- 300 kVA pad-mount transformers6 configurations, 17 units. In stock. Lead time: Ships from stock.
- 500 kVA pad-mount transformers5 configurations, 18 units. In stock. Lead time: Ships from stock.
- 750 kVA pad-mount transformers6 configurations, 12 units. In stock. Lead time: Ships from stock.
- 1000 kVA pad-mount transformers2 configurations, 2 units. In stock. Lead time: Ships from stock.
- 1500 kVA pad-mount transformers3 configurations, 5 units. In stock. Lead time: Ships from stock.
- 2000 kVA pad-mount transformers3 configurations, 6 units. In stock. Lead time: Ships from stock.
Questions
- Which 5000 kVA configurations are cleared?
- The cleared rows are 3-phase, primary 12470Y/7200, secondary 480Y/277, New, taps 2x2-1/2% ANBN, bushings Dead/Loop (Pad), 1 unit.
- What does the condition column mean?
- The condition column is the cleared lot's own label. On this page that label is New. Gripp does not regrade a unit here.
- Who can request an offer, and is a price shown?
- Public and private buyers can request an offer. This page does not show a price. Shipping is FOB origin.
- What availability and lead time are listed?
- Availability is In stock. Lead time is Ships from stock. Shipping is FOB origin.
- How do free alerts work?
- Get free alerts opens signup with a lead-time alert for this page. Signup records the request. It does not by itself send a feed.